
Bi-injection Mould
What is Bi-injection moulding?
One alternative to the two-stage rotation molding procedure for creating a two-color or two-material object is bi-injection. In a more or less defined design, two materials are independently injected into a single cavity through two independent gates. Better adhesion of the two materials at the junction is another advantage of adopting Bi-Injection molding, aside from the shorter cycle time. This is mostly because of improved molecular penetration at higher temperatures.
A Tool to Help Design with Bi-injection Process
The choice of a gate location that is appropriate for the production of bi-injection molds and the processing conditions present a design challenge. This is due to the fact that the melt flow pattern is the only factor that controls the material interface between the two materials. Understanding the flow is necessary to achieve the correct material interface, and this is where Moldex3D can help the design process.

Function Overview of Moldex3D Bi-Injection Moulding Module
With a user-friendly wizard similar to that of a traditional injection molding module, this 3D CAE module simulates the Bi-Injection molding process and helps users specify parameters. It also generates analysis results for filling/packing, cooling, and warpage.
Keep in mind that Moldex3D Bi-Injection only works with solid mesh models.
Pre-processing
Moldex3D Bi-Injection supports solid mesh projects only. The procedures inthe pre-processing stage for Moldex3D Bi-Injection module are similar to those for basic modules:
Step 1: Create a mesh model
Step 2: Create a new project
select 3D Solid Model Solver in the dropdown list.
Step 3: Create a new run
select Bi-Injection molding for Bi-Injection molding analysis.
Step 4: Run analysis
In the following, it lists special setup instructions in some particular steps.
Generate Mesh
Making mesh requires the same pre-processing steps as setting up traditional injection molding. A second set of melt entrances must be defined for bi-injection molding. When configuring the process wizard, distinct processing conditions are required since the two materials are applied with different injection controls.
Create a New Run
Two materials and their corresponding processing parameters must be assigned in the bi-injection molding setting.
Select both materials from the material wizard under the Material tab.
Enter the time needed for each material to fill the cavity completely under the Filling/Packing Settings section of the Process tab. The filling time will be the same if two materials enter at the same pace, or in a 50/50 ratio. It is also possible to assign the maximum flow rate and pressure profile.
Once these adjustments are finished, the model is prepared for analysis. To do Bi-Injection analysis, go back to Moldex3D Project, click Analysis sequence, and choose Full Analysis -CF/PCW.
Post-processing
A well-controlled Bi-Injection technique will result in a nice interfacial strength between the two materials and the appearance of an interface at the required place. The following is a description of the associated analysis results:
Two Material Distribution
The Gate Contribution result under the Filling/Packing analysis provides the best view of the material distribution. Significant product flaws could result from the more dynamic melt front evolution depicted in the melt front animation, which includes race tracking and hesitation. Changing the relative filling rate of the two materials is the simplest method of controlling the material interface. For one material, a higher filling rate will cause the interface to move further from its gate. Altering the part geometry, the gate placement, or even the material choice are other ways to control the melt flow. The best tool for adjusting processing parameters to get the appropriate flow prior to molding trials is Moldex3D melt front analysis.
Interfacial Strength
The choice of materials and their joining properties, such as temperature and joining angle, are the main determinants of the material interfacial strength. Information about material compatibility is frequently supplied by the machine manufacturer and material supplier. In contrast, Moldex3D analysis helps the user assess the quality of the weld line by providing the results of the temperature and weld line angle analyses. Following the Filling/Packing analysis, the findings for the weld line joining angle and weld line temperature are given. A high melt temperature is required for optimum adhesion at the weld line. Better molecular penetration along the weld line region is typically indicated by a large weld line angle.Consequently, the interfacial strength is greater.
Process Characteristics
From the perspective of the machine and the mold, bi-injection is the most straightforward kind of two-component injection molding. In order for the two colors of the same plastic material to meet in the bi-injection mold cavity in a roughly defined arrangement, they are injected into the cavity via two separate gates.
This method is best utilized for two reasons: On the one hand, components designed to provide information to the user through their two hues. In contrast, two colors are pumped into automobile engineering components that will eventually be converted into some intricate pictograms. The components will then be over-coated, and the pictograms will be laser-engraved.
let's see video of Bi-injection molding for headlamp product
Hot Tags: bi-injection mould, China bi-injection mould manufacturers, makers, Bi injection Mould, co-injection, Co injection Molding, Overmold, Double Injection Mould
Previous
Double Injection MouldNext
OvermoldYou Might Also Like
Send Inquiry










