Plastic Molding Tools
video

Plastic Molding Tools

It is an injection mold project for rack of passenger trim plate for Toyota Levin. As high quality with fast fabrication cycled plastic molding tools are required, the graphite is widely used for EDM. Here we would like to introduce the graphite use in mold processing.
Send Inquiry
Product Introduction
Graphite Electrode Application in Mold Machining

 

Graphite Features

1 Fast machining on CNC with high cutting performance and easy to modify, probably 3~5 times of Bronze electrode for efficiency. Besides it is tough to process super height (50~90mm) and super thin (0.2~0.5mm) electrode. To make entire male electrode as possible to guarantee great product surface which brings covert clear corners, for graphite it is not a problem which bronze electrode cannot make it.

2 Fast EDM forming with low swelling ratio and loss. It has faster electricity discharge speed than bronze which is better in EDM rough machining and much lighter for better loading. Moreover, graphite has sublimation point at 4200℃ which means it doesn’t get deformed or soft and quite save electricity loss.

3 Saving tool cost. The Electrode CNC machining, EDM machining and electrode material loss cost not a little for making plastic molding tools, so to use graphite for electrode material saves much more than of bronze. Much less electrode material and machining time is needed, comparing graphite with bronze.

product-465-327

 

Graphite Electrode Machining Needs and Characteristics

1 Electrode Manufacture

Use high speed machine to process, should be stable and three axis moves symmetrically stable without vibration. Good rotation precision should be guaranteed.

2 Characteristics

Graphite for industrial use is hard but brittle which abrades cutters very much when on CNC so it is suggested to use hard quality alloy or diamond coated cutters. It is fine to have the cutter work on workpiece at rough machining but at fine machining normally given small feed rate with fast speed to avoid cracking. Generally speaking, when cutting depth is lower than 0.2mm graphite not only rarely cracks but also gets good side wall surface quality. A device on machine to take care of graphite dust is necessary for graphite electrode CNC machining creates too much dust which may go get guide track and main axis contaminated and of course it’s toxic, so the machine should have good seal airtight.

 

Hot Tags: plastic molding tools, China plastic molding tools manufacturers, makers, molding tools, Injection Mould Tooling, Plastic Molding Tools

Send Inquiry

whatsapp

Phone

E-mail

Inquiry